Cleaning method of simple shower room how to insta

2022-07-22
  • Detail

Nowadays, most homes are equipped with simple shower rooms, because it is simple and generous, has a good sense of permeability, and can also separate the dry and wet in the bathroom, which is suitable for the installation of small family toilets. Now, let's share the cleaning method of simple shower room and how to install it

nowadays, most homes are equipped with simple shower rooms, because it is simple and generous, has a good sense of permeability, and can also separate the dry and wet in the bathroom, which is suitable for the installation of small family toilets. Now, let's share the cleaning method of simple shower room and how to install it

I. simple shower room cleaning method

1. Clean water for routine cleaning

after our shower room has been used for a period of time, there will definitely be bathing supplies and water stains on the glass. We can use clean water for cleaning, and then wipe it with a cloth, and it will become as clean and bright as new in an instant

2. Regular cleaning with glass water

simple shower room cleaning in addition to water cleaning, use glass water to clean once every 1-2 months. Glass water is specially used to clean the shower room. You must choose the right one to avoid damage to the glass. Spray the glass water on the glass first, and then wipe it with a soft cloth, so it's OK

3. If there is dirt, please wipe it with neutral cleaning cloth and soft cloth

neutral detergent must be used for the cleaning of shower room glass, so as to reduce the damage to the glass. If there are stubborn stains, we can use alcohol to remove them. We must remember not to clean them with acidic or alkaline solvents

the above is about the cleaning method of the simple shower room. You can understand that you can correctly clean the glass of the shower room at home, so that you can have a comfortable bathing environment. Then we will learn how to install the simple shower room together

II. How to install the simple shower room

1. Install the bottom basin

assemble the parts of the bottom basin, and then adjust the level of the bottom basin to ensure that there is no ponding in the basin and the basin bottom. The hose should be flexible according to the situation. Connect the basin bottom and the floor drain together, and be sure to be firm to avoid water leakage

2. Test and protection

after installation, we need to do a water test to ensure that the water flow is unobstructed, so that it can be used normally in the future

3. Install aluminum material

inject rubber particles at the drilling position, and then fix the aluminum strip on the wall with screws

4. Fix the glass

lock the glass tightly at the drilling position of the bottom basin, and then fix it with screws, which must be tightened

5. Install the shelf:

find a suitable position to install the shelf, tighten the screws of the laminate, and then fix the laminate glass to keep it vertical and horizontal

6. Install the movable door

install the hardware of the movable door, and then install the hinge at the position of the door reserved hole. After installation, adjust the position of the shaft core of the lotus leaf until the door feels the best

7. Be waterproof

install water retaining tape on the side or below the glass, and use silicone to seal the joints between aluminum and wall, glass and bottom basin

8. Finishing work

clip the decorative aluminum strip into the aluminum material to ensure that it looks simple and generous. Use a rag to clean the whole shower room, so it looks beautiful

summary: the cleaning methods of simple shower room and the related knowledge of how to install simple shower room are introduced here, hoping to be helpful to you. If you need to know more about decoration, please continue to pay attention to our decoration information, and the highlights will continue to appear in the later stage

北京眼科医院

廊坊男科医院

武汉妇科医院

长沙性病医院

Copyright © 2011 JIN SHI